Structural Failure and Manhole Rehabilitation Oversight

Explores the preventable structural failure of a manhole, causing injury after deteriorated concrete separated from the wall. BMC’s technical review identified critical shortcomings in inspection practices, rehabilitation methods, and worker safety procedures.
54-Inch Reinforced Concrete Pipe Evaluation

A 54-inch reinforced concrete pipe was found to be structurally sound overall, but the evaluation revealed manufacturing quality control issues and reinforced the need for thorough inspection before and after installation.
Manhole Deterioration — Infiltration, Soil Loss, and Sinkhole Development

This case study examines how significant structural deterioration and infiltration in a brick manhole led to soil migration and recurring sinkholes. Although early signs of washouts and infiltration were present, delayed action allowed the damage to worsen over several years.
Meter Box and Cover Failure – Installation & Inspection Oversight

This case study examines how an incompatible installation and missed inspection oversight created a serious safety risk. A technical review by Back Municipal Consulting identified critical deficiencies that contributed to the failure.
Small Tests, Big Impacts: How pH Monitoring Safeguards Sewer Systems

Manholes may not be the most glamorous part of our infrastructure, but they play a crucial role in managing wastewater and stormwater systems. To ensure the efficient and safe operation of these systems, monitoring various parameters is essential. One often overlooked but vital parameter to measure in manholes is pH.
Fixing the Unseen: Sewer Rehabilitation

Rehabilitating sewer systems is essential for a number of reasons, including public health, environmental protection, and economic benefits.
Pressure Pipe Rehab: Lining, Bursting, Coating, and Relining

There are several methods that can be used to rehabilitate pressure pipes, depending on the condition of the pipes and the specific needs of the project. Some common approaches to pressure pipe rehabilitation include the following: Pipe lining: Pipe lining involves the insertion of a flexible tube coated with resin into the existing pipe. The resin is then cured using heat or UV light, creating a new, seamless pipe within the old one. Pipe lining is often used to repair pipes that have been damaged by corrosion, cracks, or other types of wear and tear. Pipe bursting: Pipe bursting involves the use of a machine that breaks up and removes an old pipe while simultaneously replacing it with a new one. This method is often used to upgrade or replace old pipes that are damaged or too small to meet the needs of the community. Pipe coating: Pipe coating involves the application of a protective layer to the exterior of the pipe. This layer can be applied using a variety of methods, including spray coating, extrusion coating, and wrap coating. Pipe coating is often used to protect pipes from corrosion, abrasion, and other types of wear and tear. Pipe relining: Pipe relining involves the insertion of a new pipe within the old one. This can be done using a variety of methods, including inversion lining (where the new pipe is inverted and pulled through the old one) and insertion lining (where the new pipe is inserted into the old one in sections). Pipe relining is often used to repair or replace pipes that are too damaged or deteriorated to be repaired using other methods. Overall, the specific method used to rehabilitate pressure pipes will depend on the condition of the pipes and the specific needs of the project. It is important to choose the appropriate rehabilitation method to ensure the long-term integrity and performance of the pipes.
Beneath the Surface: Horizontal Directional Drilling

Horizontal directional drilling, also known as HDD, is a method of installing underground pipes, cables, or other utilities using a specialized drilling rig. The drilling rig is used to create a horizontal hole through the ground, allowing the pipes or utilities to be installed without the need for traditional excavation. HDD is often used for projects that require the installation of pipes or utilities under roads, rivers, or other obstacles that cannot be easily excavated. It is also frequently used for projects that require the installation of pipes or utilities at depths of up to 100 feet (30 meters) below the surface. During an HDD project, a small hole is dug at the surface to provide access to the underground utilities. The drilling rig is then used to create a horizontal hole through the ground, using a drill bit that is guided using lasers and sensors. As the drill bit advances through the ground, it installs the pipes or utilities as it goes. The drilling process is typically monitored and controlled remotely, with operators using cameras and other sensors to guide the drill bit and ensure that it is following the correct path. There are several benefits to using HDD, including: Minimal disruption: HDD causes minimal disruption to the surface, as the drilling process is largely hidden from view. This is particularly useful in urban areas where traditional excavation methods may cause significant disruption to traffic and other surface activities. Increased efficiency: HDD is generally faster and more efficient than traditional excavation methods, as it does not require the extensive labor and equipment costs associated with digging up and removing soil. Increased accuracy: HDD allows for greater accuracy and control in the installation of pipes and utilities, as the drilling process can be precisely guided using lasers and sensors. There are some limitations to HDD, however. It is generally more expensive than traditional excavation methods, and it is not suitable for all types of soil or geological conditions. In addition, the drilling process can be disrupted by unexpected obstacles such as underground utilities or bedrock. Despite these limitations, HDD is a valuable tool for the installation of underground pipes and utilities, offering a fast, efficient, and minimally disruptive solution. It is a valuable option to consider when faced with the need to install utilities in difficult or restricted areas.
CIPP Explained: A Smarter, Faster Way to Rehabilitate Pipelines

Cured-in-place pipe (CIPP) is a trenchless technology used to repair and rehabilitate damaged or deteriorated pipes without the need for excavation. It involves the insertion of a flexible tube coated with resin into the existing pipe. The resin is then cured using heat or UV light, creating a new, seamless pipe within the old one. CIPP is a cost-effective and efficient method of repairing pipes, as it allows for the repair of pipes without disturbing the surrounding soil or landscape. It is also a faster process than traditional excavation and pipe replacement methods, as it does not require the removal and replacement of the old pipe. CIPP is often used to repair pipes that have been damaged by corrosion, cracks, or other types of wear and tear. It can be used on a wide range of pipes, including those made of concrete, clay, and PVC, and is suitable for both small and large diameter pipes. One of the main advantages of CIPP is that it can be used to repair pipes that are located in hard-to-reach or inaccessible areas. Traditional excavation methods often require the excavation of large trenches, which can be difficult or impossible in certain situations. CIPP, on the other hand, allows for the repair of pipes without the need for excavation, making it an ideal solution for pipes located under roads, buildings, or other structures. CIPP is also a durable and long-lasting solution for pipe repair. The resin used in CIPP is resistant to corrosion and other types of wear and tear, which means that the repaired pipe should last for many years. In addition, CIPP is a flexible solution that can accommodate changes in the shape or size of the pipe over time. Overall, CIPP is a versatile and effective method of repairing pipes without the need for excavation. It is a cost-effective and efficient solution that is suitable for a wide range of pipes and applications.
Manhole Rehabilitation: 30 Tips from a 30-Year Pro

Thirty years of experience across the owner, contractor, manufacturing, and consulting engineering sides offer a unique perspective on manhole rehabilitation and highlight what those involved should know.

